TT Bahnen
2009.09.07
|
|
0 0
1126
|
Egy "szerény" összeállítás a 80-as évek elejéről.
PS-200M
Rated Power Output: 220 watts per channel, min. RMS, at 8 ohms from 20 Hz to 20 kHz with no more than 0.008% THD.
Total Harmonic Distortion: 0.008% at rated power output.
Intermodulation Distortion: 0.008% at rated power output.
Signal to Noise Ratio:
(IHF "A"): 115dB
Residual Noise:
(IHF "A"/8ohms): 0.2 mV
Input Sensitivity/Impedance: 1V/47 kohms
Damping Factor (IHF): 350
Required Load Impedance: 4 ohms to 16 ohms
Frequency Response: DC to 100 kHz ±0.2 dB
Subsonic Filter: 12dB/oct. at 18 Hz
Power Requirements: 110V/220V/240V, 50/60 Hz internally switchable for other countries.
Dimensions (W x H x D, mm): 440 x 198 x 459
Weight: 30kg
PS-200C
Input Sensitivity/Impedance/Signal to Noise Ratio (IHF "A"):
Phono 1 (MM): 2.5 mV/47k ohms/88 dB
Phono 2 (MM): 2.5 mV/33, 47, 100k ohms/88 dB
Phono 3 (MC): 0.07 mV/10 ohms/72 dB
Tuner: 150mV/47k ohms/106 dB
AUX1/2: 150mV/47k ohms/106 dB
Tape Play ½: 150mV/47k ohms/106 dB
Output Level/Impedance:
Tape Rec 1/2: 150 mV/600 ohms
Output: 1.5V/600 ohms
Rated Load Impedance: 1k ohms
Phono Max. Input Level (1 KHz):
Phono 1/2: 450 mV
Phono 3: 10 mV
Frequency Response:
Tuner/AUX 1&2/Tape Play 1&2: 0.8 Hz to 100 kHz ± 1 dB
Phono 1/2 (RIAA curve deviation): 30 Hz to 15 kHz t 0.2 dB
Phono 3 (RIAA curve deviation): 30 Hz to 15 kHz ± 0.2 dB
Total Harmonic Distortion (20 Hz to 20 KHz):
Tuner/AUX 1&2/Tape Play 1&2: 0.005% at output 1V
(Volume Max.): 0.002% at output 7V
0.005% at output 15V
Phono 1/2:
(Volume Max.): 0.005% at output 1 5V
(Volume-20 dB): 0.005% at output 1.5V
Phono 3:
(Volume Max.): 0.005% at output 1 5V
(Volume -20 dB): 0.005% at output 1.5V
Tone Control:
Bass: ±9 dB at 100 Hz
Treble: ±9 dB at 10 kHz
Subsonic Filter: 12 dB/oct. at 18 Hz
Channel Separation:
(AUX 1/2): 70 dB (Shorted Circuit)
Power Requirements: 110V/220V/240, 50/60HZ internally switchable for other countries.
Dimensions (W x H x D, mm): 440 x 90 x 457
Weight: 7.5kg.
PS-200T
FM tuner section:
Frequency Range: 87.5 MHz to 108 MHz
Sensitivity (IHF): 0.8 µV (75 ohms)
Capture Ratio: 1.0 dB
Selectivity (IHF): More than 100 dB
Image Rejection: More than 110dB (98 MHz)
IF Rejection: More than 110 dB (98 MHz)
Spurious Rejection: More than 110 dB (98 MHz)
AM Suppression: 60 dB
Signal to Noise Ratio: 75 dB
Harmonic Distortion:
Mono: Less than 0.08% wide
0.2% Narrow (100% modulation)
Stereo: Less than 0.1% wide
0.3% Narrow (100% modulation)
Tuning Indicator:
Signal: 5 point LED
Lock: LED
Multipath: LED
Muting:
Level Control: OFF: 0 dB
1: 50 µV
2: 10µV to 100µV
Stereo Separation: More than 50 dB (1 kHz)
Sub Carrier Suppression: More than 65 dB
Output Voltage: Variable, Controllable from 0 V to 1.5 V
Fixed, 450 mV (100% modulation)
Antenna Input:
Impedance: 75 ohms unbalanced
AM tuner section:
Frequency Range: 513 kHz to 1,647 kHz (520 kHz to 1,610 kHz USA and Canada)
Sensitivity (IHF): 6µV (external antenna) 50 ohms
Selectivity (IHF): More than 35 dB
Image Rejection: More than 70 dB (1,000 kHz)
IF Rejection: More than 65 dB
Signal to Noise Ratio: More than 55 dB
Output Voltage: Controllable from 0 mV to 500 mV or 150 mV (30% modulation)
Semiconductors:
Transistors: 80
Diodes: 20
FETs: 14
ICs: 36
LED: 23
Power Requirements: 110/220/240 V, 50/60 Hz internally switchable for use other countries
Dimensions (W x H x D, mm): 440 x 90 x 443
Weight: 7.8kg
|
|